Product finder

Use the filters below to browse our products. Please note that not all product offerings are available in all regions and countries, and you can use the filter below to find products available in other markets.

Active filters:
Americas
Brazil
Jotun SeaQuantum Skate Logo
Fouling protection

SeaQuantum Skate

Developed specifically to optimise performance in combination with Jotun HullSkater, delivering reliable long-term performance as an integral part of Jotun Hull Skating Solutions.​

  • Verifiable 0.5% speed loss
  • Up to 16.2% fuel savings
  • Unlimited idle days
Jotun Barrier Smart Pack Logo
Anticorrosive primers

Barrier Smart Pack

Barrier Smart Pack is a surface-tolerant, zinc-rich coating made for brush and roller.

  • Ceramically reinforced
  • Easy 1:1 mixing
  • Surface-tolerant
Jotun SeaQuantum Ultra III Logo
Fouling protection

SeaQuantum Ultra III

Low VOC antifouling, offering an ultra-low frictional resistance on the underwater hull, contributing to the reduction of fuel consumption and carbon emissions by up to 11.7%.

  • Verifiable 2.0% speed loss
  • Up to 11.7% fuel savings
  • For low-activity trade
Jotun Jotamastic 70 Logo
Anticorrosive primers

Jotamastic 70

Jotamastic 70 is a fast-curing epoxy mastic primer with surface tolerance and contributing to Green Building Standard credits.

  • Surface-tolerant
  • Short overcoating intervals
  • User friendly
Jotun Penguard Universal Logo
Anticorrosive primers

Penguard Universal

Penguard Universal is a fast drying, abrasion resistant universal epoxy coating.

  • Multipurpose
  • High robustness
  • Abrasion resistant
Jotun Marathon 1000 GF Logo
Anticorrosive primers

Marathon 1000 GF

An epoxy primer with excellent impact and abrasion resistance containing 20% glass flakes.

  • Excellent impact and abrasion resistance
  • Enforced with 20% glass flakes
  • Solvent-free
Jotun Penguard Pro GF Logo
Anticorrosive primers

Penguard Pro GF

Penguard Pro GF is a glass-flake reinforced, all-round anticorrosive coating for use all year.

  • Fast dry-to-recoat
  • Fast dry-to-handle
  • High build
Heat resistant coatings

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

  • Heat resistant coating to temperatures between -196 °C and 250 °C
  • Highest temperature resistance in the market for this technology
  • Safety even during steam out above normal operating temperature
Jotachar JF750 XT logo
Fire protection coatings

Jotachar JF750 XT

A patent-pending intumescent hydrocarbon fire protection developed for the most extreme environments.

  • Proven all-climate performance
  • Tested at the world's only Arctic test station for coatings
  • Patent pending flexible binder technology
Jotun Hardtop AX Logo
Topcoats

Hardtop AX

A polyurethane topcoat with a robust finish, very good colour and gloss retention and low VOC.

  • Robust finish
  • Easy application
  • Superior durability
Jotun Jotamastic 90 Logo
Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

  • Surface-tolerant
  • Tintable
  • Short overcoating intervals
Jotun Marathon IQ2 Logo
Mechanically resistant coatings

Marathon IQ2

Marathon IQ2 is a smooth-surface coating with ice-slip properties.

  • Smooth surface
  • Ice-slip properties
  • High impact and abrasion resistance
Jotun Pilot II Logo
Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

  • Effective application
  • Limited waste
  • Reduced application cost
Anticorrosive primers

Alkydprimer

Alkydprimer is an easy to use, one-component oxidatively drying alkyd coating.

  • Low application cost
  • Resistant to dry heat up to 120 C
  • Easy to use
Jotatemp 1000 HT logo
Heat resistant coatings

Jotatemp 1000 HT

A heat resistant coating for temperatures from -196 to 1000 °C, where substrates allow.

  • Resistant to temperatures from -196 °C to 1000 °C
  • Optimized performance on stainless steel, alloyed steel (P91) and ceramic substrates
  • Can be applied on hot substrates up to 250 °C
Jotun Hardtop Optima Logo
Topcoats

Hardtop Optima

A polysiloxane topcoat with a durable, premium finish and excellent application properties.

  • Outstanding durability
  • Excellent colour and gloss retention
  • Isocyanate-free for a safer work environment
jotun Jotamastic 87 Logo
Anticorrosive primers

Jotamastic 87

Jotamastic 87 is a surface-tolerant high build epoxy mastic primer designed for maintenance and repair.

  • Surface-tolerant
  • More than 30 years track record
  • Long lifetime in high corrosivity environments
Jotun Jotamastic 80 Logo
Anticorrosive primers

Jotamastic 80

Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair.

  • Surface-tolerant
  • Can be applied at sub-zero surface temperatures
  • Good corrosion protection in atmospheric environments

Showing 18 of 80 items

Loading...