Coatings for carriers and cargo vessels | Jotun｜[CN]

Products

Please contact your local Sales Representative from Jotun for product availability in your country.

North East Asia

China

Fire protection coatings

Jotachar JF750 XT

A patent-pending intumescent hydrocarbon fire protection developed for the most extreme environments.

Proven all-climate performance
Tested at the world's only Arctic test station for coatings
Patent pending flexible binder technology

Fouling protection

SeaQuantum Skate

Developed specifically to optimise performance in combination with Jotun HullSkater, delivering reliable long-term performance as an integral part of Jotun Hull Skating Solutions.

Verifiable 0.5% speed loss
Up to 16.2% fuel savings
Unlimited idle days

Fouling protection

SeaQuantum Ultra III

Low VOC antifouling, offering an ultra-low frictional resistance on the underwater hull, contributing to the reduction of fuel consumption and carbon emissions by up to 11.7%.

Verifiable 2.0% speed loss
Up to 11.7% fuel savings
For low-activity trade

Heat resistant coatings

Jotatemp 250

A heat resistant glass flake reinforced epoxy composite coating for temperatures from -196 to 250 °C.

Heat resistant coating to temperatures between -196 °C and 250 °C
Highest temperature resistance in the market for this technology
Safety even during steam out above normal operating temperature

Cargo hold coatings

Jotaguard 690 S

Designed to provide the ultimate cargo-hold protection with excellent abrasion resistance.

The ultimate cargo-hold protection
Supreme mechanical strength against abrasion and impact
Fast recoating/drying times

Topcoats

Hardtop AX

A polyurethane topcoat with a robust finish, very good colour and gloss retention and low VOC.

Robust finish
Easy application
Superior durability

Topcoats

Pilot II

Pilot II is an easy-to-use alkyd topcoat with a glossy finish.

Effective application
Limited waste
Reduced application cost

Anticorrosive primers

Jotamastic 90

A tintable surface-tolerant abrasion resistant epoxy mastic primer for maintenance and repair, contributing to LEED and BREEAM credits.

Surface-tolerant
Tintable
Short overcoating intervals

Mechanically resistant coatings

Marathon IQ2

Marathon IQ2 is a smooth-surface coating with ice-slip properties.

Smooth surface
Ice-slip properties
High impact and abrasion resistance

Anticorrosive primers

Marathon 550

Marathon 550 is a surface tolerant, abrasion resistant epoxy primer for high corrosivity areas.

Surface tolerant
Can be applied on damp surfaces
High abrasion and impact resistance

Topcoats

Hardtop Pro

Hardtop Pro is a premium, durable polysiloxane topcoat with a superior, long-lasting appearance.

Superior colour and gloss retention
Excellent long-lasting appearance
Excellent application properties

Anticorrosive primers

Jotamastic 80

Jotamastic 80 is a surface-tolerant epoxy mastic primer designed for maintenance and repair.

Surface-tolerant
Can be applied at sub-zero surface temperatures
Good corrosion protection in atmospheric environments

Anticorrosive primers

Jotamastic 87

Jotamastic 87 is a surface-tolerant high build epoxy mastic primer designed for maintenance and repair.

Surface-tolerant
More than 30 years track record
Long lifetime in high corrosivity environments

Anticorrosive primers

Balloxy HB Light

A high build epoxy mastic coating specially designed for maintenance and repair of water ballast tanks.

IMO PSPC for WBT approved
Surface-tolerant
High solids

Anticorrosive primers

Balloxy BT

An epoxy mastic coating specially designed for maintenance and repair of water ballast tanks.

Surface-tolerant
High solids
IMO PSPC for WBT and COT approved

Anticorrosive primers

Jotacote F60

Jotacote F60 is a pure epoxy outfitting primer.

Specially design outfitting primer
Optimal adhesion to a wide range of substrates
Wide temperature range

Anticorrosive primers

Pilot QD Primer Plus

A one-component, fast-drying alkyd primer designed for carbon steel, aluminium and wooden substrates.

One-component, oxidatively-drying alkyd primer
Fast drying, high build (40~125 mic)
Zinc-phosphate pigmented

Heat resistant coatings

Jotatemp 210

A heat resistant phenolic/novolac epoxy coating for temperatures from -196 to 210 °C.

Short overcoating intervals
Sub-zero application
Good adhesion to power tooled substrates

Showing 18 of 66 items